Que.What does the following model show?
|
| a. The discrete impulse is shifted by 8 units in time |
| b. The discrete transfer function is shifted by 8 units in time |
| c. The output has an error |
| d. The output does not match the graph |
The discrete impulse is shifted by 8 units in time
Que.What does this block do?
|
| a. Gives a logic 1 if the input is greater than it’s previous value |
| b. Gives a logic 0 if the input is greater than it’s previous value |
| c. Gives a logic 1 if the input is smaller than it’s previous value |
| d. Gives a logic 0 if the output is greater than it’s previous value |
Gives a logic 1 if the input is greater than it’s previous value
Que.What does this model do?
|
| a. Generate a step and ramp function |
| b. Generate a ramp and parabolic function |
| c. Generate pulse function |
| d. Error |
Generate a step and ramp function
Que.What does the following block do?
|
| a. Converts a Simulink signal to a physical Signal |
| b. Converts a Simulink variable to a physical variable |
| c. Converts a Simulink operation to a physical operation |
| d. Does nothing |
Converts a Simulink signal to a physical Signal
Que.What does the following block do?
|
| a. It evaluates circuit parameters after steady state |
| b. It evaluates circuit parameters of every component during Simulation |
| c. It evaluates the equation f(x)=0 for Simulink Signal |
| d. It does nothing |
It evaluates circuit parameters of every component during Simulation
Que.The error in the above model is the absence of a ___ ground.
|
| a. Simulink |
| b. HDL coder |
| c. Simscape |
| d. A.C. |
Que.Is this block necessary for circuit analysis in the SIMULINK model?
|
| a. Yes |
| b. No |
| c. Only for AC analysis |
| d. Only for DC analysis |
Que.How can we connect the following blocks?
|
| a. By a wire |
| b. By converting the signal from the sensor to a Simulink Signal |
| c. By a VCCS |
| d. By a ground |
By converting the signal from the sensor to a Simulink Signal
Que.What does this block do?
|
| a. Sends a signal from one part of a circuit to another |
| b. Sends a signal from one file to another file |
| c. Sends a signal from source to destination |
| d. Sends a function from one signal to another |
Sends a signal from one part of a circuit to another
Que.What type of signals does this block take?
|
| a. Only real signals |
| b. Only Complex signals |
| c. Only digital signals |
| d. Any signal |