Que: 282. The technical terms that helps us in differentiating between converters are:
|
| a. resolution |
| b. accuracy |
| c. precision |
| d. all of the mentioned |
(d). all of the mentioned
Que: 283. The number of repeated closeness to the true value is accounted by
|
| a. resolution |
| b. accuracy |
| c. precision |
| d. all of the mentioned |
Que: 284. Resolution is
|
| a. change in measured value from the true value |
| b. the amount of change in the input value for the corresponding change of 1 unit in the output value |
| c. as the measure of the repeated accuracy |
| d. all of the mentioned |
(b). the amount of change in the input value for the corresponding change of 1 unit in the output value
Que: 285. The process of reduction of a continuous input to a discrete output is
|
| a. levelling |
| b. signalling |
| c. quantization |
| d. converting |
Que: 286. Which of the following functions can be used for converting the nearest integer to its argument?
|
| a. int |
| b. mint |
| c. uint |
| d. nint |
Que: 287. Integral nonlinearity is termed as
|
| a. process of reduction of a continuous input to a discrete output |
| b. change in measured value from the true value |
| c. maximum deviation between this corrected staircase and the actual transfer characteristic |
| d. the function used in quantization |
(c). maximum deviation between this corrected staircase and the actual transfer characteristic
Que: 288. The SNR_______ with the increase of the number of bits.
|
| a. remains constant |
| b. goes up |
| c. goes down |
| d. goes asymmetrically |
Que: 289. The intervals between the samples is obtained from
|
| a. Fs |
| b. Ts |
| c. Us |
| d. Ks |
Que: 290. Comparator_A+ is controlled by which of the following peripheral registers?
|
| a. CACTL1 |
| b. CACTL2 |
| c. Both of the mentioned |
| d. None of the mentioned |
(c). Both of the mentioned
Que: 291. CAON bit is used to
|
| a. start a timer |
| b. start a A/D conversion |
| c. switch on the comparator module |
| d. switch on the bit transmission |
(c). switch on the comparator module